Posts Tagged ‘dell’

DELL 电脑安装win7

xeon Posted in 未分类,
0

最近买了几台DELL的电脑,对于已经停止更新五年的win7,安装是有些困难的。这里我大概列举一下问题和方法:

  1. 无法加载usb驱动的问题,主要症状就是

    安装WINdows7 提示”A required CD/DVD drive device driver is missing”

  2. 硬盘无法认到的问题
  3. 超过2T硬盘的问题

 

针对第一种情况,可以参考http://zh.community.dell.com/techcenter/b/weblog/archive/2013/04/17/windows7-windows-8-cd-dvd-usb3-0

大概的方法就是将驱动加载进boot.img 和install.img中,但是那个intel的程序写的有问题(我测试了v2和v3,换了两台机器装)要么装一半卡死,即使装完后也无法生效。

后来参照http://nucblog.net/2015/07/installing-windows-7-on-the-nuc5cpyh-or-nuc5ppyh/ 这个方法搞定了

驱动还是用的intel提供的包里面的驱动,将本来程序执行的脚本用人工替代。

这样加载完以后,进去明显发现鼠标反应快了,报错也自然消失了

 

针对第二种情况,可以参考上述链接中的加载驱动的方式,手动加载即可

针对第三种情况,上述链接也有提到,只需要进入shift+F10修改成gpt即可

MD3600I部署笔记

xeon Posted in 未分类,
0

仔细研究了一下官方的部署手册,发现很多平常不懂的东西其实手册上都讲得很清楚了。还是要多看文档。

最近要搞一个case,所以记录了for linux的,windows的就略过。

If you are using DHCP (root users only):
1.Edit the /etc/sysconfig/network file:
NETWORKING=yes HOSTNAME=mymachine.mycompany.com
2.Edit the configuration file for the connection you want to configure, either
/etc/sysconfig/network-scripts/ifcfg-ethX (for Red Hat Enterprise Linux)
or /etc/sysconfig/network/ifcfg-eth-id-XX:XX:XX:XX:XX (for SUSE
Enterprise Linux).
BOOTPROTO=dhcp
Also, verify that an IP address and netmask are not defined.
3.Restart network services using the following command:
/etc/init.d/network  restart

If you are using a static IP address (root users only):
1.Edit the /etc/sysconfig/network file as follows:
NETWORKING=yes HOSTNAME=mymachine.mycompany.com
GATEWAY=255.255.255.0
2.Edit the configuration file for the connection you want to configure, either
/etc/sysconfig/network-scripts/ifcfg-ethX (for Red Hat Enterprise Linux)
or /etc/sysconfig/network/ifcfg-eth-id-XX:XX:XX:XX:XX (for SUSE
Enterprise Linux).
BOOTPROTO=static BROADCAST=192.168.1.255 IPADDR=
192.168.1.100 NETMASK=255.255.255.0 NETWORK=
192.168.1.0 ONBOOT=yes TYPE=Ethernet
HWADDR=XX:XX:XX:XX:XX:XX GATEWAY=192.168.1.1
3.Restart network services using the following command:
/etc/init.d/network restart

Linux—Two options are available:
– To perform these tasks using the command line, refer to the
Configuration: Device Mapper Multipath for Linux chapter in the
Owner’s Manual.
– To utilize a graphical interface solution, Dell has created the Device
Mapper Utility (DMU), which provides the ability to discover and
manage the configuration of Linux Device Mapper devices for Dell
Modular Disk series storage arrays. This utility helps you set up and
manage partitions on the virtual disks of storage arrays mapped to a
Linux server. Go to http://support.dell.com/support/downloads/, and
search for DMU. Download and run the utility. For more details on
the use of DMU, refer to the online help files within the utility.

Config iscsi in linux
1 Make a copy of the default /etc/iscsi/iscsid.conf file by saving it to another
directory of your choice.

2 Edit the following entries in the /etc/iscsi/iscsid.conf file:
a.Edit or verify that the node.startup = manual line is disabled.
b.Edit or verify that the node.startup = automatic line is
enabled. This enables automatic startup of the service at boot time.
c.Verify that the following time-out value is set to 30:
node.session.timeo.replacement_timeout = 30
d.Save and close the /etc/iscsi/iscsid.conf file.

3 From the console, restart the iSCSI service with the following command:
service iscsi start

4 Verify that the iSCSI service is running during boot using the following
command from the console:
chkconfig  iscsi  on

5 To display the available iSCSI targets at the specified IP address, use the
following command:
iscsiadm –m discovery –t st -p
<IP_address_of_iSCSI_port>

6 After target discovery, use the following command to manually log in:
iscsiadm -m node –l
This login is performed automatically at startup if automatic startup is
enabled.

7 Manually log out of the session using the following command:
iscsiadm -m node -T <initiator_username> -p
<target_ip> -u

To shut down iSCSI services:
1 Stop all I/O.
2 Unmount all correlated file systems. Stop iSCSI services by running the
following command:
/etc/init.d/open-iscsi stop

 

参考文档:

http://support.dell.com/support/edocs/SYSTEMS/md3600i/en/DG/PDF/DG_en.pdf(英文)

http://support.dell.com/support/edocs/SYSTEMS/md3600i/cs/DG/PDF/DG_cs.pdf(中文)

DELL笔记本激活win7

xeon Posted in 未分类,
0

有些没有带系统的dell笔记本,装OEM的可能也会提示需要激活。

今天找到一个激活方法,无须任何第三方软件。

1.下载可以更改service tag的工具:http://ftp.us.dell.com/utility/R109071.exe

2.将asset设为12/31或者12/34.

3.重启机器,会进入工厂reset模式。所有的参数包括系统认证参数会被reset

4.它可能会提示所有磁盘都丢失,别管它,按Alt+F reset.

如果无效,可能要进入DOS刷。dos工具:http://ftp1.us.dell.com/utility/svctag.exe http://ftp.us.dell.com/utility/asset.com

另外附上OEM下载地址,电驴的。
WIN_7_PROFESSIONAL (32位盘号XNRD0).iso
MD5: 13C31865D11F7CC60F7CF9FD9AC04637
SHA1: 007A22AC63A43E4D245615F4D7C2C65F4F0A7096
CRC32: 59EAB9C3
ed2k://|file|WIN_7_PROFESSIONAL%20(32%E4%BD%8D%E7%9B%98%E5%8F%B7XNRD0).iso|2625847296|8F4326FFCECBADB8E36AE14273461299|h=ANRV63SQGXHXW4UVDZAUBZUGXIW5OIVH|/

WIN_7_PROFESSIONAL (64位盘号4XK0T).iso
MD5: 878C15BA72102BFD0E3852C1EAE4E7C0
SHA1: 7512E88E166621F3FDFB5F5C28B5AEB7AD3814CD
CRC32: BC1B5566

ed2k://|file|WIN_7_PROFESSIONAL%20(64%E4%BD%8D%E7%9B%98%E5%8F%B74XK0T).iso|3362775040|9189A1318870BED7BAED274FB781DB44|h=A4GUFU4XO3RDXVUVJ7YHRZAB2JCYPU5D|/

WIN_7_ULTIMATE (32位盘号725MX).iso
MD5: 09845EEF668DBC131A7AEB24A8D1B541
SHA1: 91C301D33F429F6D6859AB73334D2B1A49905708
CRC32: 2A4207EC
ed2k://|file|WIN_7_ULTIMATE%20(32%E4%BD%8D%E7%9B%98%E5%8F%B7725MX).iso|2625847296|54EBC1D4BB4A34E7FAF3CE133AF22BA7|h=5QJYNDHTO7SI7LQV56BM5ENXBOWOXIHC|/                                                                                                                                                                                                                                                    

WIN_7_ULTIMATE (64位盘号TKX2T).iso
MD5: 48818A0917B643D24D194767EF7B5240

SHA1: 40253D867683ED4653BAF5F8819D2A991C5DA1DA

CRC32: 2C90D21A

ed2k://|file|WIN_7_ULTIMATE%20(64%E4%BD%8D%E7%9B%98%E5%8F%B7TKX2T).iso|3362775040|355B7386ADDF624645EF6B64689A40B9|h=AKZ6E6GWLWDL3IVRFKJUGY5TS5NE43G4|/

WIN_7_PROFESSIONAL (32位盘号XNRD0).iso
MD5: E3D70BDF76E21235803ABF5ED2BF64D0
SHA1: 1BDC7E7367004D9665371D25F474EAF10B00FBCE
CRC32: 0B351973
ed2k://|file|WIN_7_PROFESSIONAL%20(32%E4%BD%8D%E7%9B%98%E5%8F%B7XNRD0).iso|2625863680|E824D5439CA26B192C7CF09D857234E5|h=CLFUCRRU7DX5DKGP3KFLQNUWZPE4P5QC|/

WIN_7_PROFESSIONAL (64位盘号4XK0T).iso
MD5: 5D399F5FF560D02C17394EB209DEB9C4
SHA1: 5A6656B83EF47BF9BA3836C13581DD8F6D1F07BE
CRC32: 9771E852
ed2k://|file|WIN_7_PROFESSIONAL%20(64%E4%BD%8D%E7%9B%98%E5%8F%B74XK0T).iso|3362783232|A5AA0CA5627F53F9E3B53B322A044C23|h=CAVVMIVTHZ2OABM5PFTEY4KGSD3DIVXD|/

WIN_7_ULTIMATE (32位盘号725MX).iso
MD5: 70A4BDAE623C70BDE37F6691CE771926
SHA1: F75AF0309E972331A769A1A69C3DB88FEC46C77D
CRC32: 6B4DBE45
ed2k://|file|WIN_7_ULTIMATE%20(32%E4%BD%8D%E7%9B%98%E5%8F%B7725MX).iso|2625863680|B402474F572F037114EA5E9586322308|h=HMVHSQ4CQ4NSVWUOR2OYWQL5QNUTFGC3|/

WIN_7_ULTIMATE (64位盘号TKX2T).iso
MD5: 6422DB9E210AE3FBCEFC5A32ACE9D9EC
SHA1: 73336B253F108445E06F5D5B37EBAA4922E96D60
CRC32: 3545F25F
ed2k://|file|WIN_7_ULTIMATE%20(64%E4%BD%8D%E7%9B%98%E5%8F%B7TKX2T).iso|3362783232|518B527844F07627367649A803F741D8|h=DLIKJKZ4Z4ZUEC7XEDX7FYD67LNMJVRJ|/

参考link:

http://forums.mydigitallife.info/threads/9055-SLP-Marker-File-Update-Utility?s=dddb2591eb8f920f7e57de027a16ecc6

http://bbs.pcbeta.com/thread-819315-1-1.html

DELL vos220s刷BIOS更新win7

xeon Posted in 未分类,
0

换了一台220s,由于是n系列的机器,所以bios相关指段都被屏蔽。网上大概搜索了一下,找到对应的bios,算了就可以免费激活win7了。

步骤如下:

1.首先下载AMI 刷新工具:AFUWIN 4.40 汉化版

详细使用说明http://www.bios.net.cn/bbs/thread-63863-1-1.html

2.下载这个bios,用前面提到的工具刷新。


http://www.adrive.com/public/f0c40ab553af17baabab6fcd6d0445d8f37efd3660f40952c31acf126b01d600.html

3.安装OEM系统,导入密钥

1.以“管理员身份”运行“命令提示符”

2.键入slmgr.vbs -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx

相关密钥请自己找对应的版本。

 

切忌:刷这个bios有个缺陷,就是服务编号没掉了,可能会对机器的保修有影响,不过没关系,坏掉的时候直接刷回原来的bios即可复原。

 

update 12.29 我找到了一个服务编号刷新的软件。在dos界面下运行svctag即可。


http://www.adrive.com/public/25bb28bb542dbb8ca67155a30944c0790b03af23de430ba25758724d683f2b31.html

DELL笔记本无电池刷BIOS

xeon Posted in 未分类,
0

现在很多DELL用户需要更新BIOS以支持win7安装。但由于机器多年使用电池早已寿终正寝了。而DELL的BIOS考虑到升级的安全性会执行检测电池的程序段,不想买电池的朋友可以用以下两种方法。

1.在DOS下升级bios

在DOS下执行 XXX.exe -forceit
(XXX.exe 就是所对应的BIOS文件)

2.通过反编译软件进行调试,不过个人觉得十分麻烦。有兴趣的可以自己研究。
http://blog.csdn.net/Afile/archive/2008/05/07/2405166.aspx

我想其他品牌的NB也差不多。我没有相关机器可以测试,下次借台来刷刷。

部分采用Phoenix的主板不适用此方法